JLG 67SL Operator Manual User Manual
Page 36
Advertising
SECTION 3 - MACHINE CONTROLS
3-4
– JLG Lift –
3121321
1. Start Assist - This push button is used to help assist
starting the machine in cold temperatures. (overrides 6
second crank limit of Engine Start Button)
2. Engine Start - A push button switch that, when
depressed, will start the engine. (crank time limited to 6
seconds before power supply required recycling)
3. Hourmeter - A meter used to measure the amount of
time the machine is in use.
4. Glow Plug LED - This Yellow LED is off under normal
operating conditions. The LED is illuminated when the
ignition is on and the temperature sensing requires pre-
glow.
NOTE:
Do not start machine when Glow Plug LED is illuminated.
Once the LED goes out, machine starting is permitted.
Advertising