JLG 80HX_HX+6_HXER ANSI Service Manual - Manual (Page 18)

SECTION 1 - SPECIFICATIONS
1-6 – JLG Lift – 3120271
Table 1-2. Lubrication Chart
Components
Number/Type
Lube Points
Capacity Lube
Interval Hours
Comments
3
Months
150 hrs
6
Months
300 hrs
1 Year
600 hrs
2 Years
1200 hrs
1 Wheel Drive Hubs Level/Fill Plug 2.75 pt. (1/2 full) EPGL
(SAE90
)
X Check level every 150 hours; change @
1200 hours
2 Slave Cylinder (Rod) 1 Grease Fitting A/R MPG X
3 Slave Cylinder (Barrel) 1 Grease Fitting A/R MPG X Gain access through boom fly section.
4 Platform Pivot 1 Grease Fitting A/R MPG X
5 Rotating Column
(Optional) 2 Grease Fittings A/R MPG X
6 Rotary Worm Gear
(Optional) N/A A/R MPG X Brush on.
7 Platform Hinges 2 Grease Fittings A/R MPG X
8 Platform Latch N/A A/R EO X
9 Boom Chain Extension
Sheave 1 Grease Fitting A/R MPG X Align access holes in mid and fly boom.
1
0 Swing Bearing 2 Grease Fittings A/R MPG X Remote Access
1
1 Lift Cylinder (Barrel End) 1 Grease Fitting A/R MPG X Remote Access
1
2 Master Cylinder (Barrel
End) 1 Grease Fitting A/R MPG X Remote Access
1
3 Master Cylinder (Rod
End) 1 Grease Fitting A/R MPG X