JLG 80HX_HX+6_HXER ANSI Service Manual User Manual
Page 91
SECTION 4 - BOOM & PLATFORM
3120271
– JLG Lift –
4-11
Capacity Indicator Boom Tape Replacement
Replacement of boom tape is required when tape is illegi-
ble or missing.
THE LOCATION DIMENSIONS AND COLORS ARE CRITICAL FOR
AN ACCURATE READING OF THE CAPACITY INDICATOR GAGE.
Installation Procedure
1.
Clean and dry fly boom top surface before installing
the tape.
2.
Install tape on center of fly boom to dimensions
shown in table.
Capacity Indicator Dial Decal Replacement
Dial decal is required to be replaced when illegible or
missing.
DECAL LOCATION DIMENSIONS ARE CRITICAL FOR ACCURATE
READING OF CAPACITY INDICATOR.
Indicator Decal Installation
1.
Clean and dry wheel surface before installing decal.
2.
Locate bottom of dial decal 1/16” from 1/8” dia. hole
on face of gage wheel.
4.8
BASKET ROTATOR BRAKE
Torque belleville washers (4160026) to 140 ft. lbs. (190
NM).
Figure 4-5. Boom Tape Replacement
Figure 4-6. Capacity Indicator Dial
Figure 4-7. Belleville Washers