Google Message Security Batch Reference Guide - Manual (Page 153)

156
Example
checkroute salesemailconfig, mailhost=mailserver.jumboinc.com
Description
Traces the connection from the server to the input mail server, <mail server>. A
common traceroute test traces the network hops between the Message Security
service and your server.
• <email config org> -- Name of the email config containing the mailhost
Enclose <email config org> in double quotes or preceded with a ‘\’ symbol if it
contains a quote (‘), double quote (“), backslash (\), apostrophe, commas, #, =
symbols.
• <mail server | IP address> -- The name of the mailhost to check
Errors
If a * character is listed in place of a time, the test failed. This failure may be due to
some hops not accepting traceroutes.
Return Values
The results show each network hop per line. Each hop will be tested 3 times and
these are shown in the results.
traceroute to mailserver.jumboinc.com
1 carl-39 (64.18.7.234) 0.335 ms 0.324 ms 0.367 ms
2 exoduscorp-rtr-f0-1 (10.1.252.158) 0.490 ms 0.354 ms 0.243 ms
3 172.31.0.9 (172.31.0.9) 1.241 ms 1.729 ms 1.243 ms
4 64.18.7.254 (64.18.7.254) 1.242 ms 1.232 ms 1.244 ms
5 inbound (64.18.7.231) 1.743 ms 1.729 ms 2.243 ms
traceroute complete
Authorization
• Read: Organization Management
• Write: Read-only for administrators
Classification
Batch system testing