Google Message Security Batch Reference Guide - Manual (Page 205)

208
See Also
“Building a Batch File” on page 19
The Message Security Administration Guide, “IP Ranges and Security”, and
“Avoid Spoofing”
iplock delete
The iplock delete command removes all domains with IP limitations configured in
the specified email configuration organization.
This command is applicable to the Google Message Security, Google Message
Discovery, and Google Message Filtering products only.
Syntax
iplock delete org=<email config org name>
Example
iplock delete org=sales_email_config
Description
Removes all IP locks for all domains that are configured in an email config
organization, <email config org name>. To selectively remove individual IP locks,
see iplock delete_range.
• <email config org name> -- The name of the organization where this
configuration will be configured. These configurations affect the email config
organization and all sub-orgs. The sub-org’s settings will be overwritten when
parent org IP settings change. Peer organizations or organizations higher in
the hierarchy are not overwritten.
Enclose <email config org name> in double quotes or preceded with a ‘\’
symbol if it contains a quote (‘), double quote (“), backslash (\), apostrophe,
commas, #, = symbols.
• <domain name> -- The name of the sender’s domain whose messages are
locked to this organization. This domain can be the message’s envelope
MAIL
FROM
address or the message’s header
From:
address.
• <IP address>[CIDR subnet]-- The NetBlock with the IP address and the
optional subnet. The Internet Protocol (IP) address used by the IP locked
domain. In addition to an IP address, a subnetwork can be listed using
Classless Internet Domain Routing (CIDR) notation. This NetBlock is
necessary for command to be processed, however it it not used. This
command clears all NetBlocks configured in the organization.