IOGear GCS1208 - Manual (Page 18)

If 2 was chosen then you can go to a
specific port by entering the port ID. You
can also move the red highlight bar to the
specific port that you want to go to and
press [Enter].
18
F1: GOTO
Clicking the
F1 field or pressing [F1] activates the GOTO function. GOTO allows you to
switch directly to a port either by keying in the port's Name, or its Port ID.
This function is to let you switch to a specific port via port ID or port’s name. Keying 1 to
choose from Port Name and 2 to choose from Port Number in the yellow box locating in the
bottom of the pink bar.
F1: GOTO
If 1 was chosen, then type in the port’s
name that you want to go to and then press
[Enter]. You can also move the red highlight
bar to the specific port that you want to go
to and press [Enter].