IOGear GCS1208 User Manual
Page 27
27
Set Operating System
This function allows you to define what kind of operating system is being used in each port.
Simply move the red highlight bar to the desire port and press [Spacebar] to cycle through
the options between WIN, MAC, SUN or OTHER.
Note: The keyboard Operating platform will change accordingly depending what you have
chosen in this function. For example, if you have chosen Mac in Port 1 as the image is
shown, the keyboard will change Mac keyboard emulation mode. Please see Hotkey Setting
Mode (HSM) and Mac/Sun Keyboard Emulation sections to see the details.
Firmware Upgrade
This function allows you to have the KVM
activates the firmware upgrade mode so
that you can perform a firmware upgrade to
the KVM. If you would like to do a firmware
upgrade, connect the firmware cable
between the computer and KVM, then type
Y to proceed with the firmware upgrade;
otherwise, type N to cancel.
After you type Y, you will see the below
screen. The KVM is now in firmware
upgrade mode. Please see Firmware
Upgrade section for details about how to
perform a firmware upgrade.