IOGear GCS1208 - Manual (Page 21)

21
Port ID Display Mode
This function allow you to choose the way
you want to show the ports in the OSD
main screen – port number only, port name
only or both. Simply move the red highlight
bar to the option that you like to use and
press [Enter]. Then, press [Esc] to exit from
this function. Scan Duration
This function allows you to set the autoscan
time interval between 0 second to 255
seconds (5 second is set by default). Simply
enter the number between 0-225 and press
[Enter]. Then press [Esc] to exit from this
function.
Function Description
All Scan all ports that the
administrator has set as
accessible for the current
logged in user
Quick
View Scan only the ports that
have been set as quick view
ports (This option will only
show up for administrator
account)
Powered
ON Scan only the ports that
have been powered on
Quick
View +
Powered
ON Scan only the ports that
have been set as quick view
ports and they have been
powered on
Scan-Skip Mode
This function allows you to set the behavior in autoscan mode. Simply move the red highlight
bar to the behavior you want and press [Enter]. Then, press [Esc] to exit from this function.