IOGear GCS1208 - Manual (Page 40)

40
Factory Default Settings
Function Default Settings
OSD Hotkey [Scroll Lock] [Scroll Lock]
Invoking HSM [Num Lock] [-]
Auto Scan Duration 5 seconds
Scan-Skip Mode All
Screen Blanker Off
Beeper On
Keyboard Operating Platform PC Compatible
Port ID Display Position Upper left corner
Port ID Display Duration 3 seconds
Port ID Display Mode Port Number + Port Name
Accessible Ports F (Full) For all Users on all ports
Auto-Logout Time Disabled
Firmware Upgrade
Note: In order to perform a firmware upgrade, you need to use a computer that’s not
connected to the KVM.
Step 1
Connect the provided firmware upgrade cable to the firmware upgrade port of the KVM and
the serial port of your computer. Connect power adapter to your power outlet and the KVM.
Step 2
Go to www.iogear.com to download the latest available firmware or the specific firmware that
you wish to upgrade to.
Step 3
Please make sure all the computers that are connected to the KVM are completely
shutdown. Then Invoke Firmware Upgrade Mode. (Please refer to OSD Operation section,
page 27). Please note that only an administrator can perform the firmware upgrade.
Step 4
Extract the file with WinRAR or compatible software. Then double click on the execute file to
begin with the Firmware Upgrade Utility.