IOGear GCS1208 - Manual (Page 29)

Set Console Video Output
This allows you to set the console video output. If any of the computer attached to the KVM
has the VGA output.
Options are:
DVI-A to VGA – select this option
if you have one DVI monitor with
a DVI-D plus VGA connector, or if
you have two monitors (1 x DVI, 1
x VGA)
DVI-A to DVI-I – select this option if
you have a DVI monitor with a DVI-I
connector
Note: In a cascade installation
or if you are using a VGA-to-DVI
adapter in your installation, select
DVI-A to DVI-I
Mouse Emulation
Enables / disable mouse emulation function.
Note: Supported in the first level of an installation only.
29