IOGear GWP512 Manual - Manual (Page 29)

26
Installation
2. The System Properties screen will pop-up.
Under Hardware tab, click Device Manager.
3. After clicking Device Manager, the following
screen will be shown.
Click on the + symbol in front of “Network
adapters” and see if an item labeled IOGEAR
GWP512 Network Adapter is visible. If you don’t
see the item below the network adapter icon but
a”?” or “!” symbol is displayed, it means that the
driver installation was unsuccessful. Highlight
“IOGEAR GWP512 Network Adapter”, right-click
mouse button and select “Properties”.