IOGear GWP512 Manual - Manual (Page 70)

Note:
The WPA client for Windows XP can be found in the
Microsoft Knowledge Base Article 815485 (http://
support.microsoft.com/default.aspx?scid=kb;en-
us;815485) or downloaded directly from Microsoft
http://www.microsoft.com/downloads/
details.aspx?FamilyID=009d8425-ce2b-47a4-abec-
274845dc9e91&displaylang=en
After installed, the Windows WPA Client will update
the wireless network configuration dialog boxes to
support new WPA options.
WPA Configuration
There are two configuration utilities to setup wireless
connectivity with an AP that supports WPA – Windows
XP: Zero Configuration Utility and Odyssey For
Marvell Utility.
For Windows XP operating system, use the Windows
built-in Zero Configuration Utility when associating with
a WPA-enabled AP. The user must ensure Service
Pack #2 and WPA Hotfix Q815485 is installed. (Please
see note.)
For Windows 2000, 98SE and ME operating system,
please use the Odyssey For Marvell utility when
associating with a WPA-enabled AP. The Odyssey For
Marvell Utility provides two ways of WPA operations:
- connect with a RASIUS server.
- connect with a WPA-pre-shared key (WPA_PSK)
configuration.
67
WPA Configuration