IOGear GWP512 Manual - Manual (Page 62)

3. If the network you select requires WEP key,
then the “Data encryption (WEP enabled)”
check box is selected by default. Select the
“The key is provided for me automatically”
check box if the WEP key is automatically
provided for you. The driver will then use the
Default Encryption key. If not, you have to clear
the check and manually enter the network key.
In this example, you have to type the WEP
keys. After you enter the WEP keys, you can
click OK to close the Wireless Network
Properties dialog box and the system will take
you back to Wireless Network Connection
Properties dialog box.
4. Click OK to save your configuration and the
Wireless Network Connection Properties will be
closed.
5. When the network connection you have configured
is available, the following bubble message will be
shown on the system tray.
59
WinXP Zero Configuration Utility