IOGear GWP512 Manual - Manual (Page 51)

48
Configuration Utility
From the Site Survey page, you can search all
access points and network adapters that are within
the service range of the network adapter. Click
Refresh button, and the network adapter will start to
search access points and WLAN adapters and show
the result on the list.
The list includes information about the Network SSID
and MAC address of the access point and WALN
adapter, the signal strength, the channel where the
access point and WLAN adapter operates, and
whether or not WEP encryption is used. You can
highlight the access point or WLAN adapter you want
to associate and click Associate or double click on
your choice to connect that device.
In the figure, you can see there are one 802.11b
access point and one 802.11g access point within the
service range of the network adapter. You may click
the Refresh button to update this list and use the
scroll bar to see more information.
Access Point Filter
This option lets you customize which sites will be
displayed in the site survey list.
Check the checkbox to enable individual wireless
mode.