IOGear GWP512 Manual - Manual (Page 55)

Protocol
• Power Save Mode: Click the down-arrow button to
select one option.
• Radio Preamble: Click the down-arrow button to
select Auto or long.
• Transmit Antenna: Click the down-arrow button to
set the transmit antenna mode, either Antenna 1,
antenna2 or diversity.
• Receive Antenna: Click the down-arrow button to
set the receive antenna mode, either diversity On
or diversity Off.
• Transmit Rate: the range of the data rate depends
on the type of AP the card is connected to.The
default value is Auto.
• Fragment Threshold: Set the fragmentation
threshold and the default value is 2346.
• RTS/CTS Threshold: Set the packet size at which
the AP issues a Request To Send (or Clear-To-Send)
frame before sending the packet.
Don’t forget to click Apply Changes to make your
configuration take effect.
52
Configuration Utility