Tcp/ip setup procedure, Installation – IOGear GWP512 Manual User Manual
Page 30
Advertising
TCP/IP Setup Procedure
27
Installation
4. Click the General tab, if the Device Status field
reports that “This device is working properly”, it
means that the driver has been installed
successfully.
After the network adapter driver and configuration
utility are installed, the TCP/IP address for the
network adapter must be set up in order to communi-
cate with other wireless LAN access points and
clients, and to have Internet access.
1. Right-click on My Network Places and select
Properties from the pop-up menu.
Advertising