2N Helios IP User manual, 1510 v1.11 - Manual (Page 25)

Mounting
– Mechanical Installation
2.2
25
Figure 2.7 Cabling Figure 2.8 Name Plate Removing
Figure 2.9 Insert Removing Figure 2.10 Label Inserting
Outdoor installation rules
 Always connect button backlighting – it is used for heating.
 The joint between the roof module and the wall must be filled with a
waterproof cement to prevent water in-leak (see Figure 2.5).
 Water must not leak in along or around the cables.
Name tag material and printing
Each 2N ® Helios IP package includes a sheet of transparent foil for laser printing. Cut
the printed foil into pieces and insert the labels in the name plates. Do not use paper
to avoid water in-leak and paper damage.
Red arrows are printed on the name plate. Make sure that the text and the arrow do
not overlap. We recommend you to use a template (MS Word) available at
www.2n.cz
for printing.
Single button
(whole) Double button
(horizontally divided)
Name 01
Name 01
Name 04
Name 02
Name 02
Name 05
Name 03 Name 03