Configuration 3.3, Outgoing calls – 2N Helios IP User manual, 1510 v1.11 User Manual
Page 89
Configuration
3.3
89
Figure 3.38 Miscellaneous Settings
Outgoing Calls
Ring time limit
Set the call set-up and ringing time limits for outgoing calls. If the calls are routed
through the GSM gateways of Part Nos. 505004, 505214 or 505612 to the GSM
network, it is advisable to set a time value longer than 20 s.
Call time limit
Set the maximum call duration. When the call end is approaching, 2N
®
Helios IP
starts generating tones signalling the end of the call. The call will automatically be
terminated 10s after this signal. To prolong the call, send a DTMF code (push #,
e.g.) on your phone.
Dial cycles limit
Set the maximum count of telephone directory searching attempts. The function is
useful whenever the substitute is defined and in the case of deadlock.