2N Omega Lite PBX Assistant - manual v1.2 - Manual (Page 34)

2N
®
PBX Assistant
User Manual
– PBX Assistant
34
www.2n.cz
4.5. Set
– Call Forwarding
Here define whether and to which line your line should be forwarded.
Set any of the following:
- Always – immediate forwarding.
- Follow me – the selected line rings on my telephone.
- Busy – forward the call if my line is busy (I am calling).
- No answer
– forward the call if I fail to answer.
- BabyCall
– forward the call immediately upon pick-up to the selected
line.
- To PSTN
– enter the PSTN telephone number for call forwarding (outside
the PBX).
Calls may be forwarded to:
- Another subscriber line
– forward the call to an internal line number.
- ARS (0-3)
– “I’m calling service ARS 0-3”. Enter the following number
into the To PSTN column.
- Dept.1-8
– forward the call to department 1-8.
- OPER – forward the call to the operator.
- Trunk1-8 – forward the call via the CO line trunk. Enter the following
number into the To PSTN column.
- PSTN
– forward the call via the outgoing CO line trunk. Enter the
following number into the To PSTN column.