2N Omega Lite PBX Assistant - manual v1.2 - Manual (Page 8)

2N
®
PBX Assistant
User Manual
– PBX Assistant
8
www.2n.cz
Once the XAPI server has been launched, the basic window is displayed
with module buttons (PBX, BIN, client, licence, database, SMS, XML). If the
installation was successful, the module keys on the panel relax. A blinking red
exclamation mark signals errors, if any.
Select the PBX setup parameters in the PBX module:
- COM
– PC serial port
- TCP (VoIP module IP address if available in the PBX, Port 6812)
- COM Baud rate (typically 57,600)