2N Omega 48 - Basic Services v1.0 - Manual (Page 18)

2N
®
- OMEGA 48
Basic services
User manual – Basic services
www.2n.cz
17
within the pre-set timeout, the PBX will return the call to your telephone set.
The called internal subscriber does not answer or is busy:
•
To get back to the original call:
Press “
Ρ
“ on your tone telephone set
Press „9“ on your pulse telephone set
•
To transfer the call to another subscriber:
nn
or
or
With tone telephone set, dial the following number into the
busy or ringing tone:
♦ nn of another internal subscriber (21, e.g.), or
♦ of department (10,20,30,40,50,60), or
♦ "9“ to get through to the PBX operator.
nn
or
With a pulse telephone set, dial the following number into
the busy or ringing tone:
♦ nn of another internal subscriber(21, e.g.), or
♦ of department (10,20,30,40,50,60).
You are already talking with the called party but wish to get back to your
original call (you have made the „Back Inquiry“):
Press "FLASH" or "R" and then “
Ρ
“ on your tone telephone
set
Press"9“ on your pulse telephone set
Then, you can repeat the call transfer attempt.
You are already talking with the called party and wish to alternate the call with
the original call:
Press "FLASH“ or "R" and then “#5“ on your tone
telephone set
Press „75“ on your pulse telephone set
Then, you can repeat your call alternating as you need.
You are already talking with the called party and wish to build a conference of
these three subscribers:
Press "FLASH“ or "R“ and then “#0“ on your tone
telephone set
Press „70“ on your pulse telephone set