2N Omega Lite - Configuration Tool manual v1.8 User Manual
Page 107
Advertising
107
16.
Now the connection is being established.
17.
If everything is OK, the following information will be displayed gradually:
establishing connection;
connection established;
remote supervision password confirmed.
18.
The following data are displayed on the bottom bar from the left to the right:
connection type (MOD);
time of the PBX to be supervised (activity is indicated by a pulsating target);
production number of the PBX to be supervised (YYMM/XXXXX connected).
11. Go on as if you used a serial link.
Advertising