2N Omega Lite - Configuration Tool manual v1.8 - Manual (Page 31)

31
Enter:

Number – enter the number to which the SMS shall be sent.

Port
– select a GSM port or bundle from which the „dispatching„ SMS shall be
sent. If you do not select one, the text message shall be sent through the first
allowed GSM port as defined in the External lines/Types of digital lines,
Sending SMS menu.
Now select the type of the text messages to be sent:

PBX STATE
– send an SMS upon every PBX start.

PBX MAINTENANCE – send an SMS upon every configuration change, PBX
FW upgrade and Reset.

GSM SIM STATE
– send an SMS to inform whether the SIM card is installed in
the GSM module or not.

GSM NETWORK STATE – send an SMS to inform whether the GSM network is
available or not.

GSM CREDIT LOW
– send an SMS upon every successful GSM call to inform
of the SIM card credit state. Set the credit info for each GSM port separately.

VOIP STATE
– send an SMS to inform of the state of voice channels to the
Ethernet module.