2N Omega Lite Panel - manual v1.0 - Manual (Page 22)

2N
®
- OMEGA Lite
Panel
User’s manual – Panel
22
www.2n.cz
Another change relates to the recording of the called number into the billing line,
where, if ARS/LCR is used, the number of the route used is entered in the call
TYPE and the number dialed is entered at the end of the line. The actually called
number or prefix is determined by the route number.
X card calling, where you dial number 0800 ???????? first, is a typical example.
The seizure is followed by your PIN in the DTMF format and then the number
dialed – 0049 301152, e.g.
The billing line shows the route number, such as P000, A000, S000 (where 0800
???????? and PIN are added), and the dialed number 0049 301152 at the line end,
which means that the PIN and used operator service number cannot be identified
from the billing line printout.
The identifier before the route number identifies the call establishing way.
A000 – automatic common outgoing call using ARS/LCR
P000 – automatic private outgoing call using ARS/LCR
S000 – automatic outgoing abbreviated dialing call using ARS/LCR
C000 – automatic forwarded outgoing call using ARS/LCR
Example:
$211000-181058-A000-01-13 - -00005-00000-0049301152-