2N Omega Lite Panel - manual v1.0 - Manual (Page 28)

2N
®
- OMEGA Lite
Panel
User’s manual – Panel
28
www.2n.cz
3.4.3. Communication Equipment Selection
This dialog helps select the way of communication with the 2N ® - OMEGA Lite
PBX.
The following three alternatives are used:
None - no communication with the PBX.
TCP/IP - TCP/IP protocol is used for communication (TCP/IP Setting).
COM - serial communication (Setting - COM Selection).
File - browsing the PBX status from the operation log file.
3.4.4. TCP/IP Setting
This dialog allows you to set the IP address for the TCP/IP communication.
It is a target address of OMEGA - AGENT that provides contact with the 2N ® -
OMEGA Lite PBX.