2N Omega Series - VoIP manual v1.2 - Manual (Page 57)

2N
®
- OMEGA Lite
Ethernet module
User Manual – Ethernet Module
57
www.2n.cz
•
Perform action – there are six possible call actions in the pop-up
menu but, basically, three of them are applied only – call rejection,
forwarding and interconnection within SIP proxy registrations.
Nevertheless, let us mention all of them for completeness:
1) Reject – the called line gets the busy tone; 2) Overwrite host –
forwards the call to the same port of the selected host;
3) Overwrite port – forwards the call to the selected port of the
same host (the same effect as with option 5); 4) Overwrite host
and port – forwards the call to any port of the selected host, 5)
Connect to VoIP module – connects the call to the selected
module SIP line, and finally 6) Search registration – tries to search
the SIP proxy registered users for the required URI and forward
the call to the appropriate host.
•
With parameter – the above actions, except for the first and last
ones, require a parameter to be set. This parameter is a new
destination for call forwarding and the SIP line name for the
Connect to VoIP module action.
The call forwarding parameter may be: the host address (2) entered either as an IP
address or a fully qualified network name, or the port number (3), or a combination
thereof (4) with the host address being separated from the port number by a colon
(:).