2N Omega Series - VoIP manual v1.2 - Manual (Page 71)

2N
®
- OMEGA Lite
Ethernet module
User Manual – Ethernet Module
71
www.2n.cz
6.1.2. Communication Setting
If you run the 2N
®
XAPI Server Console for the first time, set its
communication with the running 2N
®
XAPI server.
To set communication, use the Set/Communication menu.
Enter the following:
•
IP address – IP address of the running 2N
®
XAPI server (Ethernet module in
this case).
•
Host – name of the running 2N XAPI server PC (LocalHost), entered instead of
the IP address.
•
Port – 2N
®
XAPI server communication port. The default value is 6800 and
there is no need to change it.
•
Service – registered service number – to be entered instead of the port.
Push OK for confirmation.