ADS-TEC OPC7013/7015/7022 - Manual (Page 25)

Industrial PCs OPC7013/7015/7022
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
25
5 O PERATION
5.1 F RONT CONTROL KEYS
Depending on the equipment version, an operating system and a soft keyboard has
previously been installed ex works. The keys on the front panel are occupied with the
following functions by a specific driver in the soft keyboard:
Level 1:
Activate and deactivate the soft keyboard for letter/character input by
using the touch screen.
Level 2:
Decrease display brightness.
Level 1:
Change task (Alt+ESC) in Windows.
Level 2:
Increase display brightness.
Level 1:
Not allocated. The configuration of this level can be customised by
programming via the soft keyboard programme
Level 1:
Right mouse-key function.
Shift key (SHIFT) for activating the second keyboard level. This key
must be pressed simultaneously with the desired function key.
Note:
If the software keyboard is not installed, only the functions for display settings are active.
When changing the values, no representation is visible on the screen. The key functions
can have been previously modified in accordance with customer specific requirements.
The above described functions are pre-set ex works.
Pos : 23 /D atent ec hni k/Bedienung/ Soft keyboard/ Soft keyboar d f ür O PC / CPC / OTC / VMT / STC- Serie @ 1\ mod_1204714082851_6. doc @ 3402 @