11 component replacement, 1 opening the service slot, 11 c – ADS-TEC OPC7013/7015/7022 User Manual
Page 37
Advertising
Industrial PCs OPC7013/7015/7022
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
37
11
C
OMPONENT REPLACEMENT
Warning:
Make sure that all cable connections are removed and that all supply voltages are
disconnected from the device!
11.1
O
PENING THE SERVICE SLOT
Remove the four screws holding the service slot on the rear of the device. The screws can
be removed by using a screw driver of Tx 10 size. By using the groove on the top of the
slot cover, you can tilt the rear cover to the front and finally remove it.
Advertising