ADS-TEC OPC7013/7015/7022 - Manual (Page 44)

Industrial PCs OPC7013/7015/7022
44
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
I NSTALLATION
1)
Carefully place the SSD flash module on top of the SSD flash slot so that the contacts on
both sides match and press it carefully down.
2)
Make sure that the SSD flash module is correctly put in place, and that the contacts are
properly connected with the SSD flash slot contacts. Fasten the SSD flash module in
position by using the previously removed screw.