ADS-TEC IRF2000 User Manual - Manual (Page 17)

IRF2000 series 16
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
5.1.1 PWR / CUT & ALARM / VPN 3G
Fig. 6:
Signal Action
PWR (1) This device is not supplied
with voltage
Indicates POWER ON,
flashes during booting
The device is supplied with
voltage via POWER and is
ready for operation
Status (1) This device is not supplied
with voltage
Error during the boot-up
process / recovery image
CUT (2) The CUT interface is not
supplied with voltage
A CUT was triggered, LED
illuminates and Link is
deactivated
Alarm (2) No alarm was triggered
An alarm was triggered
VPN Up (3) No VPN tunnel is active
The tunnel activated via VPN
key is active.
3G (3) No active GSM/3G/UMTS
connection
Network search on 1Hz
Log-in declined on 2Hz
Logged in, offline
Logged in, standby
(dial-on-demand)
Logged in, online