Smartcard reader in accordance with iso 7816 – ADS-TEC IRF2000 User Manual User Manual
Page 24
IRF2000 series
23
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
5.4.8 SMARTCARD READER IN ACCORDANCE WITH ISO 7816
The SIM card reader is used to store configuration data.
PIN number
Signal name
1
VCC 5 volt
2
RESET
3
CLOCK
4
NC
5
GND
6
NC
7
I/O
8
NC
Recommendation for use:
Configurations of a device can be saved using the SIM card. If service is
required, the saved configuration can be transferred to the new device. The
setup procedure does not need to be repeated.
Further information can be found at:
Complex IT infrastructures with a large number of devices can be managed, monitored and
controlled easily and conveniently using Big-LinX.
The SIM card is available in the package with Big-LinX or as an individual accessory part.
Further information on Big-LinX can be found at: