ADS-TEC IRF2000 User Manual - Manual (Page 21)

IRF2000 series 20
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
The device is equipped with the following interfaces (rear):
Fig. 10:
10. UMTS antenna
11. SCM card reader (read in/out the ads-tec memory cards)
12. 4G card reader (UMTS functionality)
13. Top-hat rail lock
Recommendation for use:
All input voltages can be connected redundantly
5.4.1 POWER SUPPLY 24V DC
This power supply is fed to the device via a lead-through terminal.
(The figure shows the socket inside the device)
PIN number Signal name
1 24V DC
2 GND
3 PE
Technical data of the power adapter
• Input voltage range: 7 V DC to 36 V DC