AirLive POE-280HD - Manual (Page 11)

2. Package Contents and Installation
AirLive POE-280HD User’s Manual
6
2.2 Hardware Installation
Follow these steps to install the POE-280HD on your Ethernet:
A. Wall mounting and Ceiling mounting
1. Attach the alignment sticker to the wall/ceiling and drill two pilot holes into it.
2. Hammer the supplied plastic anchors into the holes.
3. Align the three holes on the base of camera with the three plastic anchors on the wall
and ceiling, insert the supplied screws to the corresponding hole and screw them.
B. Connect Cables
1. Power over Ethernet (PoE)
Using a standard RJ-45 network cable, connect the IP Camera to a PoE-enabled Hub /
Switch / Router