AirLive POE-280HD - Manual (Page 69)

7. Setting-Advanced
AirLive POE-280HD User’s Manual
64
Alarm Sending:
Select On to set to send mail with connection to the alarm detection.
File Attachment:
Set whether an image file is attached to the mail sent or not. When On is selected, the
image file made by the settings below is attached. When Off is selected, only the
message is sent.
Image File Name:
Type the file name you want to assign to the file attached to a mail. You can use up to
10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix:
Select a suffix to add to the file name
z
None: The name of the sent file will be the Image file name.
z
Date & time: The date & time suffix is added to the Image file name. The date &
time suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2
digits), hour (2 digits), minute (2 digits) and second (2 digits), and consecutive
number (2 digits), thus 14-digit number is added to the file name.
z
Sequence number: A consecutive number is added to the Image file name.
z
Sequence number clear: Click Clear and the suffix of the sequence number
returns to 1.
Alarm
z
Motion Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion Detection → Setting”)
z
Network Link Down: Click it on to receive a snapshot or a video clip while
network link down. If Attached File Type was clicked as video clip (go “Setting →
Advanced → FTP Client → General”) , you can using Alarm buffer function as a
sensor.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting →
Advanced → Alarm Buffer → Setting”)