AirLive POE-280HD - Manual (Page 84)

7. Setting-Advanced
AirLive POE-280HD User’s Manual
79
Alarm Output:
To activate the Alarm output function, select On. If not, select Off.
Digital Output:
Select High signal output and Low signal output as your alarm.
Trigger Condition:
Select the mode of the Alarm output function. You can choose“Alarm” or “Timer”.
Alarm:
Controls alarm output by synchronizing with an external sensor input or the built-in
activity detection function.
Motion Detection:
Click it on for using Motion Detection function as a sensor. You can set motion
detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion Detection → Setting”)
Network link down:
Click it on to output voltage 12 V to activate alarm output function while network link
down.
7.7 Schedule
Click Schedule on the Advanced mode menu, the Schedule setting menu appears. This
is the same menu as the setting menu which is displayed when you click Schedule to set
Effective period and Schedule in FTP client, e-Mail (SMTP), HTTP event, Record,
and Alarm out setting menu setting menu.