2 pppoe – AirLive POE-280HD User Manual
Page 46
6. Setting-Basic
AirLive POE-280HD User’s Manual
41
HTTP Port Number:
Select 80 in general situations. If you want to use a port number other than 80, select
the text box and enter a port number between 1024 and 65535.
When you have set the HTTP port number to a number other than 80 on the Network
Setting screen in the Setup Program, access the device by typing the IP address of the
device on the web browser as follows: Example: when HTTP port number is set to
Note: The IP Camera needs to be rebooted after it finishes changing the network
setting completely.
Note: If you connect the IP Camera with your computer directly, the default network
domain of camera is 192.168.1.xx
6.3.2 PPPoE
If your ISP provides Dynamic IP with authentication by username and password, type all
PPPoE information in this part. When using the PPPoE function, you need to turn on the
DDNS or IP Notification function at same time.
IP Address:
The IP address obtained at the PPPoE connecting with network.
User ID:
Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64
characters.
Password:
Enter the password for authentication necessary for PPPoE connections. Type it up to
32 characters.