AirLive POE-280HD User Manual
Page 30
6. Setting-Basic
AirLive POE-280HD User’s Manual
25
Daylight Saving Time:
There are two modes to choose for setting up daylight saving time.
By Date:
Set the start and end time by select month, day, hour, and minute.
By Week Number:
Set the start and end time by select month, week, and day.
Note: The NTP server (Network Time Protocol) is the time server which is an
Internet standard protocol built on the top of TCP / IP. This assures accurate
synchronization to the millisecond of computer clock times in a network of
computers.
Initialize
Reboot:
Click this button to reboot this IP Camera. A confirmation dialogue will appear and
then click “OK” to execute. It takes one minute to complete the reboot process.
Factory Default:
Click this button to recover this IP Camera to the factory default setting. A
confirmation dialogue will appear and then click “OK” to execute. The network
indicator on this IP Camera will start to blink. This IP Camera will reboot
automatically after completing adjustments to the default setting. Don't turn off this
IP Camera until the device reboots.