AirLive POE-280HD - Manual (Page 87)

7. Setting-Advanced
AirLive POE-280HD User’s Manual
82
7.9 Alarm Buffer
When you click Alarm Buffer on the Advanced mode menu, the Alarm buffer setting
menu appears. You can set in this menu to enable alarm buffer function connected with
FTP Client, SMTP, Network Storage, and HTTP Event.
Use alarm buffer function for recording video file in the IP Camera before and after
disconnected network. After re-connecting, these files will transmit to FTP client, SMTP,
Network storage, or HTTP event. You can set the pre-alarm and post-alarm period up to
5 seconds in Alarm Buffer function screen.
7.10 Motion Detection
There are three Motion Detection functions as sensors to set for different detecting
zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific
zone sequentially. Motion Detection function can support to FTP Client, SMTP, Network
Storage, and HTTP Event.