AirLive POE-FSH1008AT - Manual (Page 26)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
21
4.4.5 Firmware Update
Before the firmware update procedure is executed, you should enter the password twice
and then press Update button. The smart switch will erase the flash memory. There is a
self-protection mechanism in the Boot Loader, so the Boot Loader will keep intact. Even
though the power is turned off or the cable link fails during the firmware update procedure,
the Boot loader will restore the code to firmware update page.
After pressing Update button, the old web code will be erased. Then you can select the
imag e file and press “Update” button to update the firmware you need.
4.4.6 Reboot Device
Click
“Confirm" button to reboot the device.
* Note: The reboot is for software base instead of hardware base
4.5 Port Management
There are many management functions can be set or performed if you click the
Port Management on Home Page, including:
 Port Configuration
 Port Mirroring
 Bandwidth Control
 Broadcast Storm Control
In the following sessions, we will talk in detail about the management functions under the
Port Management menu.