4 device guard – AirLive POE-FSH1008AT User Manual
Page 34
Advertising
4. Web Management
AirLive POE-FSH1008AT
User’s Manual
29
4.6.4 Device Guard
There are two device guard methods to guard your PoE devices. One is guard Packet the
other is guard IP.
When Guard Pkts is enabled, the switch will do the failure action if there is no any incoming
packet at each port for a period (interval time). When the guard IP is enabled , the switch
will try to ping the IP , if the IP is not reply , the switch will do the failure action.
Advertising