2 stp port settings – AirLive POE-FSH1008AT User Manual
Page 51
Advertising
4. Web Management
AirLive POE-FSH1008AT
User’s Manual
46
4.11.2 STP Port Settings
The STP Port Setting page allows you to change the port priority and its path cost.
After STP/RSTP is enabled, the system automatically assigns the port priority and path
cost to the prot. Normally, it is necessary to change the parameters, however, you may
need to control the root switch or block port in some condition.
This page allows you to change the STP port setting. Select the port number, type the
value of the Priority and Root Path Cost.
Click "Submit" to apply the settings.
Advertising