AirLive POE-FSH1008AT - Manual (Page 33)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
28
 Priority: User can set the PoE priority from 1 ~ 3 , if total connected devices
consumption power exceed the max. available power , the critical devices will provide
the power first
4.6.2 PoE Power Delay
PoE-FSH1008AT can set how many second delay the switch will provide the power output
for connection devices when the switch is power on.
 Port: The port number
 Delay Mode: To enable or disable the delay mode.
 Delay Time: To set how many seconds the power will be delayed for connected
devices after PoE- FSH1008AT’s power on.
4.6.3 PoE Scheduling
This page can set PoE Power On/off schedule. To Set up this page , please make sure , the
switch’s system time is in the right time. To set up the switch’s system time , you need to
enable the NTP. Detail NTP setting , please refer chapter 5.14