AirLive POE-FSH1008AT - Manual (Page 47)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
42
4.10 Security
There are many management functions can be set or performed if you click the
Security on Home Page, including:
 MAC Address Binding
 TCP/UDP Filter
In the following sessions, we will talk in detail about the management functions under the
Security menu.
4.10.1 MAC Address Binding
This function provides a method for the administrator to specify the relationship between
the physical port and the MAC address. Only the packet with specified source MAC
address can be forwarded. By specifying the MAC address to each port, the network
administrator can prevent the unauthorized user from accessing the switch. Each port can
correspond to up to 3 MAC addresses.
To activate the port binding function, you should enter the correct MAC address, select the
port number, and set the port binding to “enable” and then press “update”.
 MAC Address: Users can assign up to 3 MAC addresses to the port.
 Select Port: Select the port number and click "Read" button. If you don't enter any MAC
Address before, the address is blank. If you have entered any MAC address, the field
will display the MAC addresses your previously entered.