Upgrade firmware, Pgrade, Irmware – AirLive WHP-1130 User Manual
Page 43: Igure, Arning before factory defaults are loaded, Irmware dialog box
Figure 29. Warning before factory defaults are loaded
Click Yes to return the outdoor bridge to the factory default settings.
Upgrade Firmware
The outdoor bridge’s embedded software is contained in “flash” ROM, and can be
updated over your LAN via the WLAN Management System. To download new
embedded software to the device, click Upgrade Firmware. The Upgrade Firmware
dialog box will open (Figure 30).
Figure 30. Upgrade Firmware dialog box
Browse for the file to be uploaded to the outdoor bridge, or type the path and file
name into the Firmware File field.
The Upgrade button will then become enabled. Click Upgrade to start downloading
the file to the outdoor bridge. The WLAM Management System and the outdoor
bridge’s built-in Trivial File Transfer Protocol (TFTP) client/server will load the
new executable into the outdoor bridge’s flash ROM area. If the download activity
fails, an error message will be shown in the message box. Once the file transfer is
complete, click Close to close the window.
Outdoor Bridge/Outdoor Bridge Solution
33