AirLive WHP-1130 - Manual (Page 48)

Step 4: Save the test results to a file
The tests may be repeated as described in Step 3 until the antenna is aligned at the
optimum position. Then store the test configuration and test results in a file for later
use. Click the Save Current Alignment Info icon (a floppy disk) on the toolbar to
open the Save As box (Figure 35).
Figure 35. Saving the test results to a file
A previously saved test data file can also restored back and shown in the window.
Use the previously stored file as a reference to compare with the latest test results
and evaluate the difference between them. In the following figure (Figure 36), the
red line represents the latest test results and the green line represents the previous test
results.
Outdoor Bridge/Outdoor Bridge Solution 38