AirLive WHP-1130 User Manual
Page 59
How do I set the outdoor
bridge back to its factory
default settings?
You can apply Factory Reset option from the menu of
the WLAN Management System or use Kick Start
function by the following way:
1. Connect the outdoor bridge to your PC. Please make
sure the Ethernet connection is normal.
2. Open WLAN Management System application and
click Kick Start icon.
3. Click Find icon from WLAN Kick Start window or
press <F5> key to search for outdoor bridges.
4. Right-click the outdoor bridge that you want to reset
and select Restore Default option.
What security features
does the bridge support?
Data security: The bridge supports 40-bit and 128-bit
Wired Equivalent Protocol (WEP).
Management Security: SNMP Access Control.
In what modes can the
bridge operate?
The bridge can operate in Point-to-Point mode and
Point-to-Multiple Point mode
Do the antennas need
line of sight to function?
The antennas connecting to a bridge need not only
visual line of sight, but also radio line of sight. Radio
line of sight includes an elliptical region around the
visual line of sight called the Fresnel zone. For optimal
performance, make sure the Fresnel zone is clear of all
obstructions including trees, power lines, buildings, and
geographic obstacles.
Outdoor Bridge/Outdoor Bridge Solution
49