Atop Technology AW5500 User manual - Manual (Page 100)

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
95
7.3 LED Indicators
Table 7.8
Name Color Status Description
Regular AP
Mode
Green
On
The Access Point (AP) function is enabled and has more
than one wireless client connected.
Blinking
The AP function is enabled and does not have any wireless
client connected.
Off The Access Point (AP) function is disabled.
WDS Bridge
Mode
Green
On
The WDS Bridge function is enabled and the WDS is
connected successfully.
Blinking
The WDS Bridge function is enabled and the WDS is not
connected successfully.
Off The WDS Bridge function is disabled.
AP Client Mode Green
On
The AP Client function is enabled and connected to the
remote AP successfully
Blinking
The AP Client function is enabled but not connected to the
remote AP
Off The AP Client function is disabled.
5GHz Red
On The AP is running on 5GHz band if WLAN LED is On.
Off The AP is running on 2.4GHz band if WLAN LED is On
Locate Green
Blinking The AP is being located
Off The AP is not being located
LAN
Orange
Blinking Ethernet is Connected on 10Mbps
On Ethernet is Connected on 100/1000Mbps
Off Ethernet is Disconnected
Green Blinking Data is transmitting on Ethernet