6 ping, 13 reboot and restore default settings, Ping – Atop Technology AW5500 User manual User Manual
Page 73: Reboot and restore default settings, Reboot, And restore default settings
Advertising
Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
68
4.12.6 Ping
Use the Ping function to determine whether AW5500 can reach the gateway or other devices
in the network or not. This process takes around 20 seconds. Figure 4.43 represents a
successful ping while Figure 4.44 means that the connecting device is not reachable.
Figure 4.43
Figure 4.44
4.13
Reboot and Restore Default Settings
To manually reboot the device, you may click on
“Reboot”, after which the device will restart. If
a
factory default setting is needed, tick the “Reset” checkbox, and then click on Reboot, Figure
Advertising