Atop Technology AW5500 User manual - Manual (Page 58)

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
53
4.9.4 IP Filtering
IP Filtering, as its name implies, is for filtering on the IP protocol, also known as Layer 4
filtering. Continuing its simple design, IP address is added on the Source and Destination
Address fields. Each filter only provides a one-way filtering, to create a 2-way filtering you
need to add another entry that has the source and destination address reversed. The filters
should be active once the checkbox in the first column is checked. A total of 64 different entries
can be added to the list, Figure 4.28.
Figure 4.28